Lotus Shifter Update

Mitch has sent us some great pictures of the shifter design in its current stage of development.  We are getting excited as it is looking like a really solid product.  Again our goal is to eliminate the sloppy imprecise feel of the stock shifter.  We will get a prototype into our Elise soon for testing.

White Rascal Update #6

It is alive!! We finished up the wiring last week and the White Rascal was started for the first time. The wiring was a major project for us on this car. We made the decision to dive deep into it and ripped the entire chassis harness out of the car. All non-essential wires and systems were deleted from the harness. The ABS was left alone, for now, but everything else that is not essential for a track car was deleted. We even chose to remove the problematic multi function relay in the front of the car in favor of some simple switches to activate the cooling fans.

Severely Modified Harness

Stock Wiring Harness

Before we started, the wiring harness weighed 20.20 lbs. Once we cut out the non essential items, the fuse box count dropped from 22 to 7, this is not including the 5 fuses under the dash that got deleted as well. That is 20 circuits in all that were removed. This all brought the harness weight down to about 9 lbs. The harness was laid back into the car and we made the decision to delete the stock fuse block in favor of 2 bussed fuse blocks. This allowed us to really simplify the wiring, remove a bit more weight and we have some empty spaces for what ever circuits we would like to add in the future. The two fuse blocks and ignition relay were mounted to a panel that covers where the passenger air bag used to be. We re-used the stock start button simply because it was easy and it is a cool piece, joining the start button on our switch panel is an ignition switch and one switch for each fan. Nice and simple.

After we got the car running, we wrapped up all the wiring and secured it so it wont be flopping around on track. The number one way to decrease the reliability of an electrical or plumbing system is to let it move around and get chafed/pinched. Zipties and edging material are your friend when it comes to securing wiring and plumbing. 

A look under the dash

We mounted a raceBATTERY in the spot where the AC blower assembly used to live. This moves a little bit of weight forward and opposite from the driver. 

We mounted the battery with an Xtender Bracket with no kill switch. We have two other kill switches mounted on this car. One is outside and will poke through the right side access panel at the front of the car and the other is located where the left hand driver side AC vent used to be. This configuration will allow the engine to be shut down from outside or inside the vehicle. We chose to use two of these killswitches from Pegasus Auto Racing. Properly wired, these switches will completely isolate the battery and stop the engine. 

Kill Switch Wiring Diagram

These are essentially 3 switches in one, the main part will isolate the battery. If you do a setup that just isolates the battery with a simple single pole switch, and you throw the switch with the engine running, the alternator will continue to supply power to the system and the car has no reason to shut off. So what you do is run the power to the ignition coils or ECU ignition (like we did) through the switches. Now what happens when you throw the switch is the battery gets isolated AND the engine stops because you also killed the power to the ignition coils at the same time. This creates another problem though, when you isolate the battery from the alternator it causes a large voltage spike that has nowhere to go since you shut off the connection from the alternator to the battery, this can and will damage the alternator components. The third set of contacts on the switch give the alternator voltage somewhere to go by switching the alternator output to ground the moment the connection to the battery is severed. The image above shows roughly how this all works.

A view from the driver seat

The car has been missing a steering wheel since we ripped it off early in the tear down. We finally replaced it with a Sparco Cup Wheel. This saves a few pounds of weight and allows the addition of a quick release. We do not recommend deleting your air bag in a street car, but in a race car, we consider it a necessity. We would normally run a hubQR2  but we had a sweet quick release from old stock that we decided to use. This release flips the wheel up, rather than removing it completely, this makes it easier to get in the car but the wheel stays attached to the column at all times. We can still get these hubs so if you are interested, let us know.  Yes, they are more expensive than the regular quick release kits.  8^)

That is all we are going to share for now. Look for another update next week.

Mod List:

raceUPRIGHTS

ULTRAdisc

BULLETstuds

YELLOfellos

RTD2brace

MONOballs

MRbearings

TRACKmounts2
proRAD
radHOSES
Top-Mounted Fans

ONEcoolerLINES

titanQR 

Larini De-Cat Pipe 

TRACKpipe

raceBATTERY

Xtender Bracket 

Sparco Cup Wheel

White Rascal Update #5

Now that we are all moved into our new shop, we are working hard to get the White Rascal to a more presentable condition before our open house on March 5th. Progress is slow and steady as we make time for the little Rascal between customer projects and developing new products, but bit by bit a usable car is forming. 

The front end got some attention finally with the installation of a proRAD, radHOSES  and some Top-Mounted Fans along with the stock radiator shroud. These products, along with the deletion of the AC condenser, should keep this car nice and cool on track. We re-installed the passenger side oil cooler with our ONEcoolerLINES. In our experience, the single oil cooler has been sufficient to keep oil temps in an acceptable range. A titanQR  was installed  to improve the steering response, as well as increase the reliability of the Rascal. 

 Since we are getting closer and closer to firing up this car for the first time, some attention was paid to that rear end as well. Our plan for this car is to get it running initially in a stock naturally aspirated configuration before adding some forced induction. We reinstalled the stock air box and intake and added a Larini De-Cat Pipe mated to a TRACKpipe to keep the sound down to an acceptable level. Some fresh NGK IX Iridium Sparkplugs were thrown in for good measure.

We are currently working on finishing up the wiring, the next blog will have an update on the progress of that project. Here is a teaser image for now, you can see that A LOT has been removed from this already light weight machine. 

Mod List:

raceUPRIGHTS

ULTRAdisc

BULLETstuds

YELLOfellos

RTD2brace

MONOballs

MRbearings

TRACKmounts2
proRAD
radHOSES
Top-Mounted Fans

ONEcoolerLINES

titanQR 

Larini De-Cat Pipe 

TRACKpipe

Jacking Up an Ariel Atom

We try our best here at Sector111 to not jack things up, unless of course we are talking about lifting a car up off the ground. When a car's wheels leave the ground it is always a risky proposition but if you are careful and use the correct tools, lifting your car can be done safely at home.The cars we deal with all have their own little way they like to be lifted, today we will talk about the Ariel Atom. The pictures in this blog are of the Ariel Atom 3S but it applies to all variants of the car.

Safety
Lifting car up off the ground poses a risk to both yourself and your beloved car. A "lightweight" sports car still weighs enough to cause serious injury were it to come down on any part of your body, a car lifted off the ground should always be treated with respect.

A few simple rules:

1. Always block the wheels and/or set the parking brake when lifting or working on a car.
2. NEVER place any part of your body under a car supported only by a hydraulic jack.

Jacking Points
No matter what you are working on, you always want to jack from a nice strong portion of the vehicle. On the rear of an Ariel Atom, this is easy. At the front, not so much. The recommended jacking point is where the front lower a-arm attaches to the chassis. This is very difficult to get to with a regular jack unless you take the nose bodywork off. It is much easier to place the jack at the outer portion of the a-arm where the pushrod attaches. It is very important that you do not jack from the center of the a-arm as this could bend it.

Procedure

1. Block the rear wheels and set the parking brake.
2. Lift the front of the car using the above mentioned jacking point.
3. Place a jack stand on each side under the car on the chassis tube that the lower a-arm mounts to.
   
   
4. Slowly lower the car onto the front stands. 
5. Jack up the car using the center of the rear lower chassis tube. 
6. Place jack stands on either side of the jack and slowly lower the car down onto the stands.
   
   
7. Now you can safely do what ever service work needs to be done.
   
   
8. To lower the car, do the reverse of this procedure. 

Note: On non-S versions of the car (without the sidepods), you can jack the car from the side where the rear lower a-arm attaches to the chassis. This will allow you to quickly lift a single side of the car if you just need to do something simple such as inspect or replace brake components at the track.  

White Rascal Update #4

     The White Rascal got a little bit more love lately. We are moving to a new building and had to get the car off the flatJACKS so we could move it to the new place. The freshly painted subframe was bolted up and we temporarily reinstalled the stock rack (we will be switching to the titanQR once we get some more in stock). All the suspension was hung including our raceUPRIGHTS. These uprights will give us a lower center of gravity while retaining the stock suspension geometry that the Lotus engineers spent so much time and effort figuring out, reduce unsprung mass, and allow us to dial in more camber to keep our tires gripping. We temporarily threw on some stock shocks and springs but will likely be running Nitron 46mm Race Pro 1-Way coil overs. We had some used ULTRAdisc rotors to help take care of stopping the car. The wheels were hung with some of our BULLETstuds and YELLOfellos To take care of the toe links, we installed our RTD2brace. This will make the inner toe links much stronger than stock, eliminate deflection, as well as significantly stiffen up the rear of this track focused car. 

We are trying out a new circle track setup with the wheels and tires. 

We also threw the engine back in its home with some of our TRACKmounts2. That is it for this car until we get ourselves settled in our new shop. We are still doing our moving sale so help us out and buy some sweet parts so we have less stuff to lug over to the new place, saving 15% on your order is just a bonus! 

Mod List:
raceUPRIGHTS

ULTRAdisc

BULLETstuds

YELLOfellos

RTD2brace

MONOballs

MRbearings

TRACKmounts2

Drakan Cars East - Our Partners on the East Coast!

Developing, building, selling and servicing a car takes a real team of like-minded people/companies.  Much like Palatov Motorsports, Drakan Cars East (DCE) is another key partner for us with the Drakan Spyder.  Bill Thomas and Kurt Nehlig are partners in this venture and support the NorthEast region for us.  Not only will they sell and service the Drakans, they are fully capable of installing the powertrains.  DCE have proven to be more than just a dealer and have helped to make the Drakan more complete.  I've worked with Bill for nearly ten years on Lotus and knew that they would become a great asset for us.

powertrain installation at DCE

A key feature of the Drakan is that it is available as a Rolling Chassis without an engine or trans.  The engine that we recommend is the eRod LS3 from GM Performance Parts.  This is a 50 state emissions compliant engine that is availalble from your local GM dealer.  Clients can select this engine or other LS variants that may suit their needs/desires.  The transaxle choices are various Getrag gearboxes but others are available as well.  In fact sequential solutions have been run on the Palatov D2 and will be tested on our car as well.  DCE have full capability to conduct powertrain installations.






DCE took delivery of their Drakan Spyder as a Rolling Chassis for their client, Adrian.  This was the second Drakan that has been built.  They completed the full powertrain installation at their facility.  Their extensive experience with boutique cars helped us finish some incomplete features (windshield wiper).  Additionally they also suggested improvements like a rubber cap that finishes off the rear of the headlight housing (see below).  I attended their Drakan unveiling and was pleased at how well they had finished the car.  These improvements will be incorporated into all future cars.

See rubber cap on backside of headlight housing - a DCE innovation!

DCE & Adrian went to the track to put it through its paces.  The Drakan is a powerful car but the handling is predictable as the car communicates clearly.  The guys had some fun playing around with the suspension to tune it to their liking.  They have also been testing out a new paint protection coating that is working well on high impingement areas - which is an important consideration on an open wheel car with sticky tires.  They have had the car out for 2 or 3 track days so far and have been suitably impressed.  Needless to say, they can't wait for their track season next Spring!

Bill and Adrian making tweaks to the Triple Adj Fox Racing Shocks

Power to spare!

  DCE are a great partner for us and I'm confident that our collective clients will be well served by them.  

White Rascal Update #3

The White Rascal, our poor little shop car, has not gotten much love lately. We finally made a little progress on it in the last few days. The car has been completely stripped down will all the interior and dash removed. I think we may have taken the "simplify and add lightness" just a little too far this time. We need to start bolting parts back on soon if we have any hope of getting onto the track.

The rear subframe was taken off, media blasted, then painted black. This car is going to live a long hard life on the track, it will not be a trailer queen. Low maintenance black engine enamel spray paint will keep this part looking relatively nice as well as hide track grime. 

We did need a little bit of bling so we had all our control arms powder coated a bright red. Why red? Because race car. We finished off the arms by installing a set of our MRbearings and MONOballs. This should greatly increase the steering feel of this track focused machine. The stock bushings and ball joints are fine for road use but a track car demands suspension that does not flex and deflect under load.

Expect some more progress in the coming weeks because we are all itchin' to drive her! 

Another Lotus Shifter Attempt

Well it has a been a few years since we attempted to develop a more comprehensive fix to the Achilles's heel of the Lotus: its shifter mechanism.  We have made some nice improvements to various components within the shifter and sell them as our SMOOTHoperator but the weak, flexy shifter mechanism really needs a redesign.  Earlier attempts with partners and internal reinforcements just did not get commercialized for various reasons.  We even offered, for a split second, a sequential shifter mechanism from Ikeya Formula - which proved to be too hard to adjust.

Mitch, a previous engineer of ours, moved back home and started work at B&M Shifters.  While here at Sector111, he developed our MRbearings and other goodies.  Mitch had also tried to create some boxed in reinforcements that we tested in the Art Car - see above.  Unfortunately this did not prove to work within a stock center console.  He has now been at B&M for a couple of years and gained some great knowledge about shifter designs and contacted me to see if I was ready to take another shot at a shifter.  Naturally I said yes with the condition that it must bolt into the car and fit within the stock center console.  We are trying to keep the price under $500 but I have told him to use the best materials and components to ensure the feel is the best it can be within the physical constraints of the console.

Our first step was to get a stock mechanism measured.  Mitch placed it into a Coordinate Measurement Machine and defined all the critical measurements.  See pix below.

We debated some creative new cable routing ideas but came back to the need to keep it a benign mod that would allow the owner to return to stock if required.  We will test out the shifter in our Elise and keep you updated.

Drakan Spyder (Project Dragon) Update #14: Dyno Tuning

We took the Drakan down the road to our neighbors at Cunnigham Motorsports the other day to get a bit of tuning done. Out of the box, the GM E-ROD runs really well with our setup. We were not looking for more power from the tuning. We mainly wanted to verify that our tune was not negatively affected by our intake or exhaust solutions and the it was safe enough for the abuse this car will see on the track. Also, GM claims the E-ROD makes 430HP at the crank but we were very curious what our car was actually putting down to the ground via those big 315mm R888s. After a couple of runs, we found that the GM tune is actually pretty good but the guys at Cunningham were able to clean up the air-fuel ratio a bit as well as find us a few more horses. The final peak RWHP number was 412 hp and final torque was 411 lb-ft. To put this in perspective, the very fast 2015 Z06 has about 575 RWHP and weighs in at 3524 lbs, this gives the 'vette a power to weight ratio of 0.16. Not bad, but the Drakan beats it handily with a ratio of 0.21.  Of course adding more reliable power to an LS is easily done...not that it needs it!

Drakan Dyno Sheet