Showing posts with label AiM. Show all posts
Showing posts with label AiM. Show all posts

Thursday, April 23, 2015

Project Dragon (Drakan Spyder) Update #12: More Track Testing &Improvements

We are working hard with the Drakan and a few weeks behind on our updates.  We been back to the track earlier in April for additional testing and up to Palatov/Lancair for body fitment two weeks ago.  We go back again next week to begin building the first official production car.  Keep reading to learn the latest...

More Track Testing

Joe and Dave went out to Spring Mountain once again to verify some changes that were made to the car. We had to test our new oil pan baffle, front suspension arms, and HRE wheels. 

Our previous test on SMMR's East Course 2.1 showed oil pressure dropping to 11 psi when the car was subjected to two quick successive left hand turns under hard braking. This drop in oil pressure was unacceptable to us - Dave is a pro and is driving the car hard so we know this is an extreme case. In all of our previous testing with Dave, oil pressure data was acceptable.  In fact we posted about our good performance on this blog entry.  Clearly this specific combination of left hand turns was too much for the stock pan to handle.  We got in contact with Improved Racing and had them send us an oil pan baffle and crank scraper kit. With the new baffle installed, our lowest oil pressure in the same corner was 24 psi. The Improved Racing baffle will now be standard on all Drakan Spyders with a Dailey Engineering dry sump offered as a future option.


We had a few handling related tweaks to try out as well; a new set of front wishbones and our new HRE wheels. The steering was a bit heavy on our test mule - even compared to similar cars with no power steering. Palatov redesigned the new front wishbones with different geometry that has less caster built in. These new arms are a drastic difference, the steering is now much lighter, and this should contribute to less driver fatigue both on the street and track.  Dave appreciated the reduced effort at the end of the test day!

The new HRE wheels were also slightly different. The front wheels have a bit more offset and the rears are 0.5" wider than what we were running in previous tests. Dave was pleased with the new wheels, he said the wider front track provided more grip. Admittedly, some of this improvement may have been due to fresh rubber, but the wheels definitely did not hurt the handling. 

Ultimately we turned 1:28s time on this circuit.  This compares favorably with a new Lotus V6 Cup R that is running slicks and a sequential.  This car is turning 1:27s at the hand of our good friend & Lotus Cup champ, Jack.  With slicks, we're sure we can shave a second or two off of our time.

Other updates

The new switch panel is in and operational. The backlighting looks awesome and the switch location and action is spot on. The ignition switch is locking so you can't accidentally shut off the car.  The horn and turn signals can be actuated without removing your hand from the wheel and all the rest of the switches are well within reach. The left hand panel which is home to our master kill switch and brake bias knob turned out well also.


The switch paneling is nice but the new dash from AiM has certainly stolen the show.  We posted a quick video on our Instagram page: HERE.  The MXS is now in production and it is a bolt in swap from our old MXL2. Functionally, it is almost exactly the same; visually, it is in another league. The MXS features a beautiful TFT display that not only looks gorgeous but offers more flexibility for different page displays. There is a street page with a conventional style dial tachometer, a race page with a sweeping tach, and a test page that can display 11 different parameters at once.  We are really pleased with this kit.  The Drakan will will be ready for AiM video so owners will be able to add any of AiM's cameras easily.

The other notable upgrade since our last post are the new rotors. We decided to up the braking performance of the Drakan with some 12.88" rotors from Girodisc, the same people who make our ULTRAdisc rotors for the Elise/Exige, Evora, and soon Alfa Romeo 4C (testing now). These disks are high quality, well proven pieces that add to the performance and reliability of the Drakan. Another plus of our rotor setup is that they are the same front to rear, this ultimately means that replacement rotors are going to be less expensive.  We are thinking about you guys who keep spares and are properly prepared...8^)



Wednesday, April 18, 2012

Buttonwillow Results + Prep, Tuning & Coaching

We had great results at the second Lotus Cup race weekend at Buttonwillow. We managed to secure two Open class victories and one overall win.  We also secured the fastest lap all weekend again - beating the entire field including the 211s that we're attempting to compete against.  Our driver Glen is doing a superb job along with the team in prepping the Art Car.  We also had help from our friend and driving coach Dave Thilenius.  

Challenges
The weekend did not run 'issue-free'.  We suffered from an electrical cut that killed the car on the first day during practice.  Patrick managed to figure out that one of the wires in our ignition was loose and secured it.  We have kept the stock key and start button on our car.  Glen's knees are quite close to these wires and he believed his knees were brushing the wires causing the cut out.  Unfortunately for us, the problem cropped back up on the second race - while we were in the lead, on the last lap!   Luckily Glen had a clear enough mind to wiggle the wires under the steering column and get the car started.  He managed to get in behind Andy and secure the Open Class victory and second place overall.  Eliminating this wire is now high on our list of reliability improvements.

AiM Data Coaching
We're big advocates of using data to lower lap times.  We also use it as an R&D tool as we develop our products.  At Buttonwillow we were graced with Dave T's presence and benefitted from his extensive expertise with coaching via data.  Reviewing the data allowed Glen to adjust his shifts, braking points and more in order to achieve the fastest lap of the weekend.  Our friend Andy has used data to secure LCU championships with his 211 and is one of the fastest drivers in our series.  We have a new AiM product that makes getting into data much more affordable and practical for track day enthusiast and racers alike.  See the new Solo DL.

Adjustments     
The guys were taking tire temps and pressures and adjusting pressures and camber.  Amazingly we are running less than -2deg of Camber with this kit and getting even tire temps.  Typically these Yokos require -3deg.  We also softened the High Speed Compression to improve our grip over the curbs.  In doing so, we stiffen the Low Speed Compression as well to quicken the turn-in.  Buttonwillow is a much bumpier track than Chuckwalla so a softer set-up is ideal.  Our new raceUPRIGHTs are running beautifully and allowing for an amazing low ride height.  We kept our ride height at 103mm/110mm to insure we did not bottom out.  These ride heights can not be achieved in an Elise or Exige with stock uprights.  We are now conducting our Set Down process to see how the raceUPRIGHTs are fairing.  I peeked at them and they remain in great shape after 5 track days.  Expect another Blog posting reviewing the condition in more detail.
Car Prep
A key tool that we use to prep and insure our car is running well are simple Checklists.  We use these lists to confirm that we checked critical areas on the car before it leaves for a practice session, qualifying or race.  Every time - not just at the beginning of the day.  It takes a bunch of time to run through these checklists but we've found it is a key way to ensure our car runs as well as it can.  Since we are running with the LCU leaders, we can't afford to make mistakes with the car prep.  If any of you would like copies of our Checklists, let us know.  They are an effective tool for the casual track day enthusiast to the hardcore racer.

What's Next?
We can't be happier with our results so far this season.  We have some work to do before the next race - including a Lexan Optic Armor windshield that should shave another 16lbs from our Art Car.    Infineon is the next race in mid May and we will be competing against a bunch of NorCal locals who know the track well.  We'll need to bring our 'A' game to keep our track record as it will be very competitive!

 Now watch Glen turn the record lap...

Sunday, May 1, 2011

Track Testing The Blue Car: Dogbox, Oil Lines, Fuelcell, AiM...


Mario, Ryan and I spent Friday at Willow Springs raceway conducting our initial shakedown testing of The Blue Car. We had installed several new serious bits on her. The key items we wanted to test were the Jubu Dogbox transmission, our new Oil Cooler lines, FuelSafe Fuelcell, proRAD with relocated Fans, Silicone hoses, Brake caliper relocation and an extensive AiM data system. Performance, Safety and Reliability are our key goals with this car. We believe a car that runs properly and is not broken is a car that delivers the most smiles.

Since the car had been stripped down with all the major mechanical systems removed and then reinstalled, we wanted to do this testing before running her at any serious event. We completed most of the major work on Wed and started her up that afternoon. After fixing a couple of leaks, we let her sit until Thurs.

On Thursday we took her to the dyno to run through all the gears of the new Jubu Dogbox. We figured this would be the best way to see if any other issues may pop up before we got to the track. Sure enough, a couple of items surfaced which we sorted.

This gave us the confidence to head to Willow so we loaded up the trailer and drove up early Friday morn. Overall we had good results and the car ran well with only the brakes being the lone issue that we need to rethink. My comments for each item is listed below:

AiM System: We've run a removable AiM Race system in our previous cars for data logging. We decided to step up to an MXL Pro dash this time and wire in even more sensors to log more critical data. The following data is now being monitored with our AiM system: Oil temp & Pressure, Fuel Pressure, Water Temp, Exhaust Gas Temp, Air Fuel Ratio, Trans Fluid temp In & Out, and more. We logged this data during our test session at the dyno and more importantly at the track. The dash allowed us to program warning lights for several critical areas like Oil & Fuel Pressure. With all the new items we were testing, this became a nice feature to have. The shift lights are another sweet feature that I appreciated.

Jubu Dogbox: The stock trans on our cars is a weak link in track driven cars -especially those with 250+hp. We've been running the Jubu gears for some time with good luck so decided that the Dogbox was worth testing as it does away with the weak syncros of the stock box. Our engine builder, Bruce Nogrady was given the gear stack and he assembled it along with our OS Giken LSD into a stock trans housing. This means it bolts right up to the engine and also uses the stock shifter mechanism. Care must be taken in the assembly of the Dogbox as it is not a job for the average trans shop. We used the OS Giken TR1A clutch/flywheel as the system requires a strong clutch.

Trans fluid temps were monitored but we had no issues. In fact the temps were a bit on the cool side so we pulled the fuse for the transCOOLER pump. A Dogbox can run much cooler than a traditional gearbox and our data hinted this was the case. More testing will be required to determine this with any certainty.

The straight gears found in this kit are strong but are loud. This is a track
solution for all but the absolutely mental. Upshifts can be executed without the clutch. Downshifts need proper rev matching. It was an easy and quick adjustment for me. I've driven manual car since I was 16 and this was my first time with a Dogbox but it was fairly intuitive. Getting into gear when stopped can require a couple of attempts - you also need to shift with some authority and can't be too gentle. Driving this gearbox was simply a blast. The speed of upshifts was startling! Jubu have run this kit all of last year and had great success. I will anticipate that this will be a great upgrade for many track enthusiasts - with deep pockets as it is expensive!

Oil Cooler Lines: The stock oil cooler lines are failing on cars so we decided to sort a fix. Ryan found the correct BSP fittings that attach directly to the factory oil coolers. The innovation in our kit revolves around the weight savings we've found by using lightweight line and a new clamping method. We wanted to run the car on track at elevated oil temps and pressures to see how they would hold up. Our AiM system logged oil pressure between 50-60psi on track with oil temps in 180-200degF range. We suffered no leaks or issues so feel confident to run the car even harder. Additionally we are sending out our fittings/clamp/lines to an independent test lab that conducts testing for the auto industry. I think our kit holds plenty of promise.

FuelSafe Fuelcell: We decided to develop an FIA-spec fuelcell for clients looking for a bag based fuel tank solution. More and more clients are taking street based Lotus and converting them to track only race cars. We still feel our V2 Fuel Tank remains the best solution for those clients who drive their cars on the street as it retains all the factory safety & emissions components. We began working with FuelSafe and after a couple of months of development we landed on a solution that has more capacity than stock AND uses the factory filler system safely. Having proper roll-over protection with the factory filler system is not an easy proposition but we've done it with this tank.

We installed the larger Denso fuel pump that plugs directly into the factory housing since this car features the KATANA265. The factory fuel housing drops in with ease. It requires no modification so is a neat, safe and reliable solution. We measured fuel pressures of 45-55 psi even through fast, 1+g turns like turns 8 & 9. We were very happy with the results.

Front Brake Caliper Relocation: We tested the OE front caliper onto the rear rotor along with our 308BBK. We'd run this on the street and in the canyons with good success. We knew this bias change was dramatic so felt we needed to test it on track as well. Willow Springs is not a hard braking track but there are a couple of corners that require some good braking. Additionally I overslowed the car many times to test the brakes and found that the car's handling became slightly darty and pulled. We started with the same race pads on all four corners and then tried different compounds. None that we tried, worked to my satisfaction. We need to go back to the drawing board on this effort to make it commercially viable.

Silicone Hoses: Our partner Dr. Bruce Lee, in Singapore, commissioned silicone hoses for our cars. We became the lucky guinea pigs to test them out. Since we yanked out the heater core from our car, his system (lacks heater lines) was perfect. Though the stock hoses are not a problem yet, we know that as cars age, it will be a good upgrade. This kit worked fine with no problems.

proRAD with Top Mounted Fans: Water temps are a problem in the hot climate in the southwest. Especially track driven cars that are cranking up power over stock. We found this out, first hand, a couple of years ago and blogged about it briefly here. Our goal, by the end of this summer, will be to offer a well tested solution for clients who need added water cooling capacity. Temps at the track were in the 70sdegF so we did not experience difficult conditions. We'll get a better test later this Spring.

Other: EGTs on the car remained in a very safe zone - between 1000-1400degF. We tested an even quieter Larini8" exhaust. Frankly with the Dogbox whine, it was hard to hear this exhaust. But from the outside, it sounds superb with the Larini header , straight pipe and HKS Intake. This combination sounds fantastic to my jaded ears. Our new cage was a welcome addition as well. We've not added door bars so ingress/egress issues were improved - dare I say even over stock since you can grab the bars for assistance?! The Magnetic Blue paint is striking in the sun and will be enhanced further with a distinctive paint scheme that we are now scheming....We are now ready to push the car very hard with our test driver to see if these bits can hold up to 10/10s driving at the hands of a professional. Stay tuned....