Project 996 Road Rallye: Part 13

 The 996RR received a few new upgrades including a new front tube bumper, fabric tow straps, mud flaps and a front fascia - with a special coating.  

We had the 'new' front fascia coated with bed liner used on trucks.  The front of most sportscars get hammered - especially when following other cars in the canyons or tracks.  Instead using clearbra, we thought we would try this textured coating.

The front tube bumper was refabbed and extended a bit from the original.  It will get powder coated black onced we finalize the mounts for the Baja Designs DOT legal lights arrive.  I'm excited about improving the lighting on the car as the stock headlights are now 26years old.  These older cars really benefit from updated LED lighting.  

The mudflaps we installed are pretty low.  They are scraping on even the slightest incline.  The noise is pretty annoying!  We will cut them back and then extend them with rubber sheet. 

 

The rear tube bumper is still a work in progress...

We also have Braid wheels on order:

• Front: Fullrace A = 17x8 ET40
• Rear : Winrace S = 17x10 ET40
• Lightweight machining on all wheels
• Lighter Gold

The offsets are 10mm pushed out from stock.  I plan to run stock diameter tires so these specs should work for our needs.  Note the different spoke count?  Influenced by the Drakan Spyder.  Yes, we like to be different!

front: Model Fullrace A

rear: Model Winrace S

Emira Collision Part 3

 Months of waiting for parts has been frustrating for all involved.  Finally we are getting close with this collision/repair.  I would estimate that we are 95% of the way.

We reinstalled much of the interior including the side curtain airbags.  

The rear boot of the car required some fitment in order for the rear fenders and hatch to line up.  This took a fair amount of trial and error.  We had the rear glass removed from the original hatch and reinstalled onto the new hatch after it was painted.  Over all it is coming together nicely.  

We had Lee clean things up including removing some adhesive that remained from the tow yard after the accident.