ABS Block Delete for S2 Elise and Exige

 Some of you know that we are working on a simple solution to delete the ABS on the Elise/Exige.  The stock ABS comes off a Minivan from the 90s and is not a great performer.  'Black Ice" mode is a common issue for aggressive drivers - especially in bumpy conditions.

We have been working with Girodisc on an idea that would delete the ABS system and replace it with a simple block that would route the fluid to the front and rear circuits via a bias adjuster.  This would allow the driver to adjust the bias to his liking. 

We received the ABS Delete Block (need a better name!) to install.  It is on our ArtCar2 and has seen some quick street testing around our shop.  The block originally came with the bias adjuster connected to it but we decided to install a remote bias adjuster so we could place it in the cabin within reach of a driver.  The servo remains in the system but you lose the speedo.  This car runs the AiM MX2E so we are using the GPS antennae for speed.

The install is slick and I'm looking forward to getting it to the track to test.